Built-in High-Pressure Air Assist Nozzle
P1 Pro 20W nozzle has an advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the P1 Pro 20W series sprays airflow faster. The advanced air-assist and high-power laser can accelerate material burning and residue removal, greatly improve cutting performance and make laser cutting faster and cleaner.

20W Quad-laser Technology
Equipped with a 20W laser head, its spot size is 0.08*0.1mm, bringing delicate laser light, concentrated energy, and cutting efficiency is higher.

Focusing Controller
The rotary sliding table and fixed focus knife can precisely control the focal length adjustment of the laser module to make the engraving image finer.

Adjustable Airflow
The automatic air pump is very durable. It works with the 32-bit air assist mainboard to realize automatic air assist.

Stronger Cutting Penetration 
P1 Pro high-speed air assist and high energy density lasers both increase the cutting penetration. Available to cut more materials, and also easier to deal with high-density woods.

Upgraded 32-bit Motherboard 
The P1 motherboard uses 32-bit chips, with faster computing speed, and it still reserves Z-axis and limits switch functions to upgrade. It still perfectly supports laser cutting software like Lightburn and LaserGRBL.

Top-Notch Safety
P1 Pro 20W laser engraver is equipped with an emergency stop switch, key turn switch, and move/tip instant stop device, which can stop work urgently if any abnormality is found in the carving.

Wide Compatibility
This machine works well with LightBurn and LaserGRBL, supports Windows, Mac OS, iOS, and Android system, and engraving file supports SVG, NC, BMP, JPG, PNG, etc.

Specification