SCULPFUN S30 Ultra 11W laser engraver sports a giant engraving size of 600*600m, featuring the same automatic air assist system as the S30 series. Coupling an upgraded linear guide rail with a focus spot of 0.08x0.08mm, the S30 Ultra allows you to create custom engraved products with a wide variety of materials at the best possible accuracy.
SCULPFUN S30 Ultra delivers an engraving area of 600x600mm which saves the trouble of accessorizing an extension kit in the future when large-scale cutting is needed.
Sculpfun S30 Ultra 11W laser uses 2pcs 6W diodes, which allows it to cut 10mm balsa wood and 6mm plywood separately by one pass and is the second-to-none choice for hobbyists.
It adopts an enhanced 42-bit stepping motor that provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kg·cm (ordinary machines are 3.1 Kg·cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.
SCULPFUN S30 Ultra series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.
SCULPFUN S30 Ultra series laser engraver uses an innovative replaceable lens, which greatly improves the service life of the laser, and is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power.
The latest 32-bit motherboard supports an automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.
SCULPFUN S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.
It is equipped with an emergency stop switch and a safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.
SCULPFUN S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, you only need to replace the laser head without any other changes.
SCULPFUN S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.
Solid and Durable Frame
Made of high-strength aluminum alloy, its frame can withstand a weight of up to 50kg without damage, which is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.
SCULPFUN S30 Ultra - One Step To Achieve The Best Engravings
600*600mm Engraving Size - most ideas can be realized.
11W/22W/33W Laser Power - new diode technology.
Upgraded Linear Slide - precise and fast
Automatic Air Assist - cleaner cuts
600*600mm Engraving Area
SCULPFUN S30 Ultra sports an extra large engraving area of 600x600mm, which saves the trouble of accessorizing an extension kit in the future when large-scale cutting is required.
Upgraded Safety
SCULPFUN S30 Ultra is dotted with an emergency switch that will stop the machine immediately once you press it. Pulling out the key, the machine will not be turned on, preventing children from turning it on by mistake.
Easy To Upgrade
SCULPFUN S30 Ultra machine structure is almost perfect, no upgrades are required and can be used for a long time. When upgrading the laser power in the future, users only need to replace the laser head, other parts replacements are required.
*SCULPFUN S30 Series use the same structure, cable management, air pump and power adapters.
SCULPFUN S30 Ultra Series - 3 Power Options
11W - Cut 10mm balsa wood and 6mm plywood in one pass.
22W - Cut 15mm balsa wood and 10mm plywood in one pass.
33W - Cut 20mm balsa wood and 15mm plywood in one pass.
Accessories That Bring Ease To Your Life
Cylinder seat
Laser repair tool
Nozzle clean tool
Automatically Controller Air Assist ( M8)
S30 Ultra is equipped with an air-assisted 32-bit motherboard and a control-type air pump, which will intelligently control the air assist ON or OFF (Lightburn M8 Air Assist Switch).
Powerful Quad-laser Technology
Single 6W Diode x 2
Replaceable Lens - Long Service Laser
Sculpfun S30 Ultra 11w laser module adopts the replaceable design. After long-term use or if the lens is damaged, it can be replaced to recover the power. This will greatly improve the service life of the laser, which is more than 10 times higher than ordinary lasers.
Laser Repair Kit
SCULPFUN S30 Ultra provides a free laser repair kit in the package, including a lens, sealing ring, tweezers, screws, and wrench, when your laser has a problem, it can be repaired in time and thus greatly extends the service life.
Built-in High-Pressure Air-Assist Nozzle
SCULPFUN 30 Ultra 11w nozzle is powered by an advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor
, the SCULPFUN S30 Ultra sprays airflow faster.
Upgraded 0.005mm high precision heavy-duty linear guide rail allows SCULPFUN S30 Ultra to move quickly, smoothly, and accurately. Moreover, it bears more weight.
Back Opening Window Design - Helps blow the smoke to the back quickly.
HD Protection Glass - Effectively blocks the dazzling light. Convenient for observation.
32-Bit Air Assist Mainboard
SCULPFUN S30 Ultra motherboard supports the automatic air assist control function ( Lightburn M8 Switch) and reserves the SD Card offline control function. ( Sold separately as an upgrade kit. )
Upgraded 4.2kg.cm Stepper Motor
Strengthened 4.2 Kg- cm 42-bit step motor provides sufficient power to expedite the movement of the machine.
Automatic Air Pump in Package
SCULPFUN S30 Ultra comes with a durable automatic air pump in the package that outputs 30L/min airflow steadily. It works with the 32-bit air assist mainboard to avail the automatic air assist (Lightburn M8 Air Assist).
| General | Brand: SCULPFUN Model: S30 Ultra 11W |
| Specification |
Laser Information: Machine Information: Air Pump: Motherboard: 32-bit air-assisted motherboard, supports Bluetooth wireless connection. Engravable/Cutting Material: Operating Software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF, and other picture formats. Power Input: 110V AC, 60Hz |
| Weight & Size | Package Weight: 9.9kg Package Size(L x W x H): 86.8x25x24cm |
| Package Contents | 1 x S30 Ultra 11W Laser Engraver 1 x Laser Shield 1 x Laser Repair Kit 1 x 24V Automatic Air Pump 2 x 460*230*3mm Wood Board 2 x 460*230mm Protective Aluminum Plate 2 x Limit Switch 1 x 24V 7A Power Adapter 1 x Power Cord 1 x USB Cable 1 x Rubber Air Hose 1 x Tool Box 1 x Laser Goggles Step 1-6 Installation Package 1 x X-axis Assembly 2 x X-profiles 2 x Y-profiles 1 x Control Box Assembly 3 x Support Feet 1 x Cable Clamp Bag 1 x Fixed Focus Column Mount 1 x Spare Screw Pack 1 x Non-slip Seat Pack 1 x User Manual |
| Total Rate： | Review Summary: 0 reviews | Write a review |
