Auto air-assisted, the SCULPFUN S30 Ultra 22W laser engraver sports a giant engraving size of 600*600m. Coupling an upgraded linear guide rail with a focus spot of 0.08x0.10mm, the S30 Ultra allows you to create custom engraved products with a wide variety of materials at the best possible accuracy.
Designed with a large engraving area of 600x600mm, the SCULPFUN S30 Ultra 22W Laser is capable of completing large-scale cutting works and there will be no need to upgrade in future use.
S30 Ultra 22W laser can cut 15mm balsa wood and 10mm plywood separately by one pass, bringing you a faster engraving and cutting experience.
Adopting a 42-bit stepping motor, the S30 Ultra 222W laser provides sufficient power for the machine to move at high speed. The torque reaches 4.2 Kg·cm (ordinary machines are 3.1 Kg·cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.
S30 Ultra series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.
S30 Ultra series laser engraver uses an innovative replaceable lens, which greatly improves the service life of the laser, and is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power.
The latest 32-bit motherboard supports an automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.
S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.
It is equipped with an emergency stop switch and a safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.
S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, you only need to replace the laser head without any other changes.
S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.
Made of high-strength aluminum alloy, its frame can withstand a weight of up to 50kg without damage, which is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.
600*600mm Engraving Area
SCULPFUN S30 Ultra sports an extra large engraving area of 600x600mm, which saves the trouble of accessorizing an extension kit in the future when large-scale cutting is required.
SCULPFUN S30 Ultra is dotted with an emergency switch that will stop the machine immediately once you press it. Pulling out the key, the machine will not be turned on, preventing children from turning it on by mistake.
SCULPFUN S30 Ultra machine structure is almost perfect, no upgrades are required, and can be used for a long time. When upgrading the laser power in the future, users only need to replace the laser head, other parts replacements are required.
*SCULPFUN S30 Series use the same structure, cable management, air pump, and power adapters.
11W - Cut 10mm balsa wood and 6mm plywood in one pass.
22W - Cut 15mm balsa wood and 10mm plywood in one pass.
33W - Cut 20mm balsa wood and 15mm plywood in one pass.
Cylinder seat
Laser repair tool
Nozzle clean tool
SCULPFUN S30 Ultra is equipped with an air-assisted 32-bit motherboard and a control-type air pump, which will intelligently control the air assist ON or OFF (Lightburn M8 Air Assist Switch).
Single 6W Diode x 4
SCULPFUN S30 Ultra 22W laser engraving machine deals with 18 mm thick wood, 15mm thick acrylic, and 0.05mm thick metal with ease. You can also colorize your metal engravings.
Sculpfun S30 Ultra 22w laser module adopts the replaceable design. After long-term use or if the lens is damaged, it can be replaced to recover the power. This will greatly improve the service life of the laser, which is more than 10 times higher than ordinary lasers.
Sculpfun S30 Ultra provides a free laser repair kit in the package, including a lens, sealing ring, tweezers, screws, and wrench, when your laser has a problem, it can be repaired in time and thus greatly extending the service life.
SCULPFUN 30 Ultra 22w nozzle is powered by an advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the SCULPFUN S30 Ultra sprays airflow faster.
allows SCULPFUN S30 Ultra to move quickly, smoothly, and accurately. Moreover, it bears more weight.
SCULPFUN S30 Ultra motherboard supports the automatic air assist control function ( Lightburn M8 Switch) and reserves the SD Card offline control function. ( Sold separately as an upgrade kit. )
Strengthened 4.2 Kg- cm 42-bit step motor provides sufficient power to expedite the movement of the machine.
SCULPFUN S30 Ultra comes with a durable automatic air pump in the package that outputs 30L/min airflow steadily. It works with the 32-bit air assist mainboard to avail the automatic air assist (Lightburn M8 Air Assist).
| General | Brand: SCULPFUN Type: Laser Engraver Model: S30 Ultra 22W Color: Blue |
| Specification | Laser Information: Diode Laser Output Power: 22W (this is light energy, not electrical energy) Laser Focus: 0.08x0.10mm Laser Wavelength 455±5nm Focusing Method: fixed focus column + sliding device Laser Protective Cover: Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield. Machine Information: Air Pump: Motherboard: 32-bit air-assisted motherboard, supports Bluetooth wireless connection. Engravable/Cutting Material: Operating Software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF, and other picture formats. Power Input: 220V AC, 50Hz |
| Weight & Size | Package Weight: 10kg Package Size(L x W x H): 86.8x25x24cm |
| Package Contents | 1 x S30 Ultra 22W Laser Engraver 1 x Laser Shield 1 x Laser Repair Kit 1 x 24V Automatic Air Pump 2 x 460*230*3mm Wood Board 2 x 460*230mm Protective Aluminum Plate 2 x Limit Switch 1 x 24V 7A Power Adapter 1 x Power Cord 1 x USB Cable 1 x Rubber Air Hose 1 x Tool Box 1 x Laser Goggles Step 1-6 Installation Package 1 x X-axis Assembly 2 x X-profiles 2 x Y-profiles 1 x Control Box Assembly 3 x Support Feet 1 x Cable Clamp Bag 1 x Fixed Focus Column Mount 1 x Spare Screw Pack 1 x Non-slip Seat Pack 1 x User Manual |
| Total Rate： | Review Summary: 0 reviews | Write a review |
